Short Internet research did reveal that of the most common OTR jobs (Over The Road), long-haul truck driving probably pays the best. According to some Internet sources, striking a deal with a good trucking company may land you an opportunity to take home $70,000+ before bonuses. According to truckerclassifieds.com research, the state that pays best for trucking jobs is Mississippi, with an average of $68,000 per year.
These RWD monsters are still somewhat pricey due to rarity compared to the sedan and coupe models, but you can expect to find some examples in the ballpark of $45,000. That’s really not bad at all though when you compare this car to the likes of the Porsche Panamera and wagon offerings from Mercedes AMG.
What would you do with a couple used engines from the local junkyard? Take them down to the shop and make something crazy? Some people have the balls to do it, and a few even have the time, money, and resources. And unless you have the dime to spend on a crate motor, building used engines is the way to go. But which ones can you actually count on?
Some enthusiast may point out the Road Runner-based Superbird, as a better car but we are not among them. The styling was too radical and the Hemi powered Road Runner was just a better overall car.
One thing that is consistent is the 2.0L V8 engine. On top of having an incredibly small displacement for a V8, the engine features four chain-driven camshafts, a SPICA fuel injection system, 16 spark plugs, and has a rev-limit of 10,000 rpm. The unique powerplant produces 230 hp in the road ready editions and 270 hp in race units. Leave it to Alfa Romeo to find an interesting way to deliver power to the ground.
The tricky thing about the Grand National, though, is that it was seemingly improved upon every year. It started with 200 hp and 300 lb-ft of torque in ’84, and by ’87 it was pushing 245 hp and 355 lb-ft.
That performance does come at a cost, though. Apparently, the EPA has officially rated this as the least fuel-efficient wagon for sale in the US at 14 mpg. Let’s not forget that this car also runs the quarter mile in about 12 seconds, so is fuel economy really going to be our concern here? I didn’t think so.
There’s only one place to find these used engines: the venerated Honda S2000. That means someone will have to wreck one and extract its beating heart for you to commit automotive debauchery. But act fast: Honda only built about 110,000 for you to choose from, and we can already think of 50,000 perfect uses for an F20C.
These crazy cheap cars are some of the most badass wagons on the market, plain and simple. It does 0-60 in 4 seconds flat and features the same 6.2L supercharged V8 (inspired by the C6 ZR1 engine) as its sedan brother. It’s good for 556 hp, 551 lb-ft. of torque, and a shitload of good times, screeching tires, and sideways turns.
If you want to do this, read about what it takes to shoehorn one of these used engines into a Fiero. Spoiler alert: it’s not a lot. Everyone talks about the larger Cummins used engines, but what about the four-cylinder 4BT? The “baby Cummins” will allow you stick one of those crude stickers on any car you want. Turns out not everybody knows what those stickers mean, so follow that link to get learnt. I’ll wait.
The F136 can be found in the Ferrari F430 and California, the Alfa 8C, and Maserati models dating back to 2002. This includes the often-daily-driven-by-pretentious-fools Quattroporte, lending credence to its reliability, but if you want the real deal step up and pull one out of a 458.
Of course, buying a plow is a no-brainer. That could set you back by $3,000 or so. Depending on the deal you made with the district, you could pay that out in a few days. It is hard to precisely assess how much you can earn but some suggest $175 $350 can be made per work hour.
The thing that makes these rides so special is that they offer performance that new models do at a fraction of the price. While some of these cars could easily still be compared to new models from other segments, they’re still very affordable for what they can do.
Full torque is available at 3,500 rpm. Nissan has not released the figures for projected top speed, etc for the latest model. If the 2.9 second 0 to 60 mph and Nurburgring Nordschleife lap of only 7:08 minutes produced by the 2015 edition are any indication, the newest NISMO should kick the hell out of several supercars and costs less than $200,000!
For 1970, the Cuda shed its fastback design and added a few engine options. The top engine was the 426 Hemi. Capable of 425 hp, the Hemi Cuda sucked air through dual Carter AFB four-barrel carbs sitting under a functional Shaker scoop. To handle its power, the ’70 Cuda had extra-heavy-duty front torsion bars with a spring rate of 124 lbs. per inch and a heavy-duty front stabilizer bar. Sitting out back were 148-lbs. per-inch rear leaf springs and extra-heavy-duty shocks. The 1970 Plymouth Hemi Cuda was built to run full out all day!